Factorymation Spring 2024 Catalog

To Order Call 1.800.972.0436 or Visit factorymation.com www.factorymation.com/programmablecontrollers PROGRAMMABLE CONTROLLERS 110 General Specifications Power Supply Input Power Voltage Range 12VDC Models: 10.4-14.4V 24VDC Models: 20.4-28.8V 110/220VAC: 85-265VAC Power Consumption 12VDC: 12-point, 150mA 20-point: 150mA 24VDC: 12-point, 90mA 20-point: 150mA 100-240VAC: 90mA Wire Size (All Terminals) 26 to 14 AWG Programming Programming Languages Ladder/Function Block Program Memory 300 Lines or 260 Function Blocks Programming Storage Media Flash Execution Speed 10ms/cycle Built-in HMI Customizable Screens 31 (H Coils) LCD Display 4 Lines x 16 Characters Function Keys 8, 4 User-defined (Z Inputs) Auxiliary Coils Maximum Number 126 (63 M-coils, 63 N-coils) Timers Maximum Number 31 T-coils Timing Ranges 0.01s–9999min Counters Maximum Number 31 C-coils Highest Count 999999 RTC (Real Time Clock) Number Available 31 R-coils Resolution 1 min Time Span Available Week, Year, Month, Day, Hour, Min Daylight Savings Feature Yes Power Off RTC Retention 240 Hours Compare Instructions (Analog, Timer, or Counter Values) Number Available 31 G-coils Compare Functions EQ, LT, GT, LE, GE, NE PID Control (Proportional-Integral-Derivative) Maximum Number 15 Loops (PI Coils) Math Instructions Number Available 62 (31 AS Coils, 31 MD Coils) Up to 124 Additional (Plus Unused T, C, R, G coils) Math Operations + - x / Data Multiplexer Instructions Number Available 15 (MX Coils) Resolution 2-bit, 4 Data Registers Data Registers Number Available 240 (DR Coils, 16-bit) Shift Instruction Number Available 1 8-bit (S Coil) Analog Ramp Instructions Number Available 31 (AR Coils) Environmental Enclosure Type IP20 Maximum Vibration 1G According to IEC60068-2-6 Operating Temperature Range -4° to 131°F (-20° to 55°C) Storage Temperature Range -40° to 158°F (-40° to 70°C) Maximum Humidity 90% (Relative, Non-condensing) Vibration 0.075mm Amplitude; 1.0g Acceleration Weight 10-point: 230g; 8-point:190g; 20-point: 345g Agency Approvals cUL , CE, UL, UL File# E205406 Discrete Inputs Current Consumption 4mA @12VDC 3.2mA @24VDC 1.3mA @100-240VAC Input Signal ”OFF” Threshold 12VDC: < 2.5VDC; 24VDC: < 5VDC; 110/220VAC: < 40VAC Input Signal ”ON” Threshold 12VDC: > 7.5VDC; 24VDC: > 15VDC; 110/220VAC: > 79VAC Input On Delay DC: 5ms; 240VAC: 50ms; 120VAC: 90ms Input Off Delay DC: 3ms; 240VAC: 50ms; 120VAC: 90ms Transistor Type 3-wire PNP Sensor compatible High Speed Input Frequency 1kHz Standard Input Frequency < 40 Hz Required Protection Inverse voltage protection required Analog Inputs Resolution 12 bit Acceptable Input Range Base module: Analog input: 0-10VDC voltage, 24VDC when used as discrete input Expansion module: Analog input: 0-10VDC voltage or 0- 20mA current Input Signal ”OFF” Threshold < 5VDC (as 24VDC discrete input) Input Signal ”ON” Threshold > 9.8VDC (as 24VDC discrete input) Isolation None Short Circuit Protection Yes Total Number Available Base module: A01-A04 Expansion module: A05-A08 Temperature Input (SG2-4PT Expansion Module) Sensor Type 3-wire PT100 Temperature Input Range -148° to 1112°F (-100°C to 600°C) Resolution 0.18°F (0.1°C) Accuracy ±1% Relay Outputs Contact Material Ag Alloy Current Rating 8A HP Rating 1/3HP@120V 1/2HP@250V Maximum Load Resistive: 8A/point; Inductive: 4A/point Maximum Operating Time 15ms (normal condition) Life Expectancy (Rated Load) 100k operations Minimum Load 16.7mA Transistor Outputs Pulse Outputs 1 PWM and 1 PWM or Pulse Output PWM Max. Output Frequency 0.5kHz (1ms on,1ms off) Standard Max. Output Frequency 100Hz Voltage Specification 10-28.8VDC Current Capacity 1A Maximum Load Resistive: 0.5A/point; Inductive: 0.3A/point Minimum Load 0.2mA Analog Outputs (SG2-2AO Expansion Module) Analog Output Range 0V–10V (load > 500 ohm), 0-20mA (load < 500 ohm) Resolution 10-bit Full Scale Accuracy 2.5% Built-in RS485 Communication (SG2-20Vx-x Units Only) Modbus-RTU Master/Slave mode, 4800-115.2kb, supports Modbus function codes 1, 3, 5, 6, 16 DataLink Link up to 8 Remote-I/O slave units (SG2-20Vx-x only) to 1-master unit at 8.4kb Remote-I/O Link up to 3 SG2-20Vx-x units (1-master, 2-slaves) at 38.4kb 20-point Models 10/12-point Models Expansion Modules SG2-10PS-24 Communication Options All Modules 4.96 (126) 3.15 (80) 3-Ø 0.18 (4.5) 3.86 (98) 4.17 (106) 2.35 (59.6) 1.39 (35.4) 1.83 (46.5) 1.5 (38) 2-Ø 0.18 (4.5) 3.86 (98) 3.54 (90) 4.17 (106) 2.83 (72) 3.54 (90) 3.86 (98) 4.17 (106) 2-Ø 0.18 (4.5) 2.83 (72) 3.54 (90) 3.86 (98) 4.17 (106) 2-Ø 0.18 (4.5) Power 10PS-24 AC 100-240 V L N + + – – V Out Output 24VDC – 1.3A Dimensions in(mm)